DeviceMaster ® DM-2102
2-Port serial device server with DB9 connectors and one Ethernet port
Product Name Change Notification
Part Number: 99550-0
- Wide DC input voltage range (5-30 volts)
- Redundant power input for fail-safe power
- Wide operating temperature range (-40º to 75ºC)
- RS-232/422/485 software selectable interfaces
- PortVision DX
- DB9 male serial connectors
- Wide input power range
- Screw terminal power connector
- 25KV surge protection for serial ports
- Features DIN rail mounting
- Configuration management via SSL & SSH
- SSL/TLS serial data stream encryption up to TLS 1.2
- TLS 1.2 compliant when running SocketServer
- IPv6 support
- Real-time email event notification
The DeviceMaster ® DM-2102 serial device server can be used to network-enable two serial devices on any Ethernet network and is ideal for applications in: traffic and transportation, power utility, industrial automation, material handling and any project that requires serial-to-Ethernet communication with DIN rail-based equipment installations.
- DeviceMaster ® DM-2102
- Loopback Plug
- DIN rail
- Bus Interface Specification 10/100BASE-T
-
Memory
- SDRAM 32 MB
- Flash 8 MB
- Enclosure UL94-V0 PLASTIC
- Installation Method DIN Rail (35mm)
- LED IndicatorsStatus, Ethernet Port Link and Activity
- Dimensions 4.6" x 3.9" x 0.9"
116.8 x 99.1 x 22.9 mm - Product Weight 0.30 lbs
136 g
- DC Input Voltage 5-30V
- Power Consumption (max) 2.9 Watts
- Power Input Redundancy Dual Redundant Power Input
- ESD Surge Protection Provides minimum of 25KV protection for all serial lines. All Ethernet components are rated to 1.5KV magnetic surge protection.
-
Air temperature
- System On -40 to 75° C
- System Off -40 to 85° C
- Operating Humidity (non-condensing) 0% to 95%
- Altitude 0 to 10,000 Feet
3,048 m - MTBF (Mean Time Between Failures) 46.3 Years
Serial Communications
- Connector Type DB9 Male
- Number of Ports 2
- Software Interfaces RS-232
RS-422
RS-485 2-Wire
RS-485 4-Wire, Master
RS-485 4-Wire, Slave -
Baud Rate 300 bps to 230.4 kbps
- Receive Buffer 4.5KB
- Transmit Buffer 4.5KB
-
Device Driver Data Control
- Data Bits*5, 6, 7 or 8
- Parity*Odd, Even, Mark, Space, or none
- Stop Bits*1, 1.5 or 2
- Flow Control Hardware, Software, or None
- *Data bits 5, 6: Supported only in RFC2217 and socket mode
- *Mark, Space parity: Supported only in RFC2217 and socket mode
- *Stop bit 1.5: Supported only when used with 5 data bits
- Number of Ports1
- Speed10/100Mbps
- Connector TypeRJ45F Auto MDI/MDI-X
- LEDEthernet Link (Green)
Ethernet Activity (Amber) - Ethernet specific featuresAuto MDI/MDI-X, Auto Negotiation, Link/Activity Status LED
- Network ProtocolsARP, BOOTP, DHCP/RARP, HTTP, HTTPS, SSH, SSL/TLS, ICMP, RFC 1006 (ISO over TCP), Ping, RFC2217, SNMP (MIB-II), TCP/IP & UDP socket services, Telnet, and TFTP, and supports IP multicast data transmission
Features
- SNMP Support MONITORING ONLY
- Other Software FeaturesLowest Latency
NS-Link COM/TTY port redirector
TCP/IP & UDP Socket Services
Telnet/RFC2217 COM Port control
PortVision DX remote management - Manufacturer's Warranty 5 Years
- Packaged Shipping Weight 0.70 lbs
317.5 g - Package Dimensions5-11/16” x 5-11/16” x 3-3/8”
144.5 x 144.5 x 85.7mm - UPC Code 7-56727-99550-0
- Country of Origin USA
- ECCN 5A992
- Schedule B Number 8471.80.1000
Device Drivers
-
Emissions
FCC Part 15 Subpart B
Class A limit
Canadian EMC Requirements
ICES-003
European Standard EN61000-6-4
International Standard IEC 61000-6-4
European Standard EN55032
AS/NZS CISPR 32
-
Immunity
European Standard EN61000-6-2
International Standard IEC 61000-6-2
European Standard EN55024
IEC 1000-4-2/EN61000-4-2: ESD
IEC 1000-4-3/EN61000-4-3: RF
IEC 1000-4-4/EN61000-4-4: FAST TRANSIENT
IEC 1000-4-5/EN61000-4-5: SURGE
IEC 1000-4-6/EN61000-4-6: CONDUCTED DISTURBANCE
IEC 1000-4-8/EN61000-4-8: MAGNETIC FIELD
IEC 1000-4-11/EN61000-4-11: DIPS AND VOLTAGE VARIATIONS
-
Safety
UL 61010-1, UL 61010-2-201
CSA C22.2 No. 61010-1-12
CSA C22.2 No. 61010-2-201:14 -
Other Regulatory Approvals
European Standard: RoHS 2 compliant under CE
NEMA TS2 COMPLIANT
- Ground must be tied to signal ground.
» Industrial Distributors
» North American Distributors
» International Distributors
Pepperl+Fuchs Comtrol's Pre-sales Team
For sales questions or to locate a reseller near you.
+1-800-926-6876 (1-800-Go Rocket)
+1-763-957-6000
Fax: +1-763-957-6001
[email protected]
Pepperl+Fuchs Comtrol's Industrial Automation Sales
For sales questions or to locate an industrial distributor near you.
+1-800-926-6876 (1-800-Go Rocket)
+1-763-957-6000
Fax: +1-763-957-6001
[email protected]
Part Number: 99550-0
Call +1.763.957.6000, or e-mail [email protected]
For technical assistance, our U.S.-based technical support team is only a phone call away.
Call +1.763.957.6000, or visit our forum .
Pepperl+Fuchs Comtrol offers a 30-Day satisfaction guarantee and a 5-year limited warranty on all DeviceMaster DIN rail family products!
