RocketLinx ES7506

Part Number: 32050-0

Comtrol’s RocketLinx ES7506 product is designed for industrial PoE applications such as IP surveillance or wireless access points, where the power source is not conveniently located.

The RocketLinx ES7506 supports intelligent PoE control and schedule management. Each of the four PoE ports can be configured in a weekly schedule by hourly basis and PoE on/off can be remotely controlled via SNMP and Web.

It is compliant to both IEEE 802.3af PoE as well as the pioneer standard of IEEE802.3at PoE Plus designed for boosting PoE delivery up to 30W in each of the four PoE ports. The RocketLinx ES7506 can auto-detect 24V and 48V power input and can deliver 24V and 48V PoE outputs which allow more applications where 48VDC is not an option.

The two uplink ports can be configured as Redundant Ring ports recovering network failure in less than 5ms, or RSTP ports integrating with other standard switches. Full network management features such as SNMP v3, QoS, IGMP v3 are all supported. If the powered device fails to respond after a pre-configured time interval, the product will reboot the powered device and continue to monitor the powered device in every pre-configured time interval. Also, unmanageable powered devices can be managed through the RocketLinx switch.

The IP-31 rigid aluminum flat casing and wide operation temperature range ensure reliable operation in places such as mass transit vehicles or outdoor usage.

System Specifications

Hardware
Bus Interface Specification	10/100/100BASE-TX
Enclosure	IP-31 Grade Aluminum Metal Case Drop-Waterproof and Dustproof
Installation	Panel Mount or DIN-Rail Mount
LED Indicators	Power 1, Power 2, Ring Master (R.M.) 10/100Base-TX Link/Activity Alarm PoE Status
Dimensions	6.4" x 1.75" x 5.35"
Product Weight	1.44 lbs
Technology
Standards	IEEE802.3 10BASE-T IEEE802.3u 100BASE-T IEEE802.1p Class of Service IEEE802.3af Power Over Ethernet (PoE) IEEE802.3at High Power PoE IEEE802.1d Spanning Tree IEEE802.1w Rapid Spanning Tree
Flow Control	IEEE802.3x Flow Control and Back Pressure
Performance
Switch Technology	32Gbps Switch Fabric Store and Forward Switch Technology
System Throughput	14,880pps for 10Mbps 148,880pps for 100Mbps
Number of MAC Address	2K
Packet Buffer Memory	1Mbits
Transfer Packet Size	64 - 1552 Bytes (with port based VLAN)
Priority Queues per Port	4
PoE Technology	End-Span wiring architecture PD classification detection, class ID 0~3 follow IEEE802.3af standard, and 30W High power deliver procedures for class ID 4. Pin assignment: V+ (RJ-45 Pin 4,5), V- (RJ-45 Pin 7,8), TX (RJ-45 Pin 1,2), RX (RJ-45 Pin 3,6) Protection: Provides over-current protection by PD class ID
Management Features
Configuration	NetVision Utility, HTTP, HTTPS, SSH, SNMP V1/V2C/V3, Traps, Web Browser, CLI Management, Admin Password, DHCP Client, status, Scheduling, TFTP/HTTP/NetVision update for firmware
Management Security	4 entries for web, telnet, SNMP management security
SNMP Trap	Provides Cold start, Warm start, Port event, Power event, Authentication failure, PoE trap and private trap for proprietary functions
SNMP MIB	RFC 1213 MIBII, RFC 1493 Bridge MIB, RFC 1757 RMON MIB, RFC 2674 VLAN MIB, RFC 1643 Ethernet like MIB, RFC1215 Trap MIB, RFC 3621 Power Ethernet MIB, Private MIB
Firmware upgrade	TFTP, HTTP and NetVision
System Log	1000 system entries for system or remote log server
Event Alarm Relay	Relay alarm for Port link down, PoE, and system power events
Quality of Service	Quality of Service determined by port, Tag and IPv4 Type of Service
Class of Service	IEEE802.1p class of service, with 4 priority queues
DHCP	DHCP Cilent and Server function with specified IP exclusion and MAC binding function
Timer	Supports Network Time Protocol (NTP) to synchronize time from NTP Server
VLAN	Port based VLAN
IGMP Snooping	Supports IGMP Snooping v1/v2/v3 and IGMP Query v1/v2
IP Security	IP security to prevent unauthorized access
Network Redundancy
Rapid Spanning Tree Protocol (RSTP)	IEEE802.1D-2004 STP and RSTP IEEE802.1w Rapid Spanning Tree Protocol (RSTP)
Redundant Ring	Failure recovery in less than 5ms
Rapid Dual Homing (RDH)	Inter-operational with higher level switches and RSTP protocol compliant
PoE Features
Standards
IEEE802.3af	Power Over Ethernet
IEEE802.3at	High Power PoE
Number of PoE Injector Ports	4
Maximum Power/PoE Port (Max.)
12.9W @ VIN (Non-Standard PoE mode)	24VDC
15.4W @ VIN (IEEE802.3af mode)	48VDC
30W @ VIN (IEEE802.3at mode)	55VDC
Total Power Budget	Up to 100W (IEEE802.3at)
Standard PoE Voltage Output	IEE802.3af compliant 44-57VDC
Non-Standard PoE Voltage Output	24VDC
PoE Control	User-configuration for PoE enable, disable, or schedule-based PoE function
Smart Powered Device Alive-Check	User-configuration to monitor real-time status of connected PD’s. PoE port is reset to bring a PD back to working state, if connected PD fails
Real-time Status on Web Interface	Real-time status on port status, PoE status, PD Status
Forced Powering	Advanced feature to supply power to non-standard PoE devices that can’t be detected as valid PD’s
Power Limit Control	Standard mode for IEEE802.3af PD Manual mode for user-configuration of power limit to IEEE802.3af standard PD Ultra mode for user-configuration to perform at the 30W power imitation or forced powering mode for non-standard PD
PoE Schedule Control	PoE ports are configurable as on/off by hourly/weekly basis. Each PoE port can be scheduled to activate/deactivate PoE power with different rule using web interface
Electrical Specifications
Device
DC Input Voltage	24-55 VDC
Current Consupmtion without PD Load
+24VDC	330mA
+48VDC	170mA
Power Consupmtion (max.)	8W (without PD load)
Power Connector	1
Power Connector Type	6-Pin Screw Terminal Block
Power Input Redundancy	Dual Redundant Independent Power Inputs
Reverse Polarity Protection	Yes
Power Alarm Relay	Alarm for power failure notification
Relay Rating	1A Max. @ 24VDC
Environmental Specifications
Air Temperature
System On	-20° to 60° C
System Off	-40° to 85° C
Operating Humidity (non-condensing)	5% to 95%
MTBF (Mean Time Between Failures)	37 years
Ethernet Specification
Connector Type	RJ-45
Number of Ports	4 x 10/100Base-TX with PoE Injector; 2 x 10/100Base-TX
Ethernet Cable Type	CAT-3, CAT-4, CAT-5, CAT-5e, CAT-6 (UTP or STP)
Link Distance	100 Meters
Port Alarm Relay	Alarm Relay for Port Failure Notification
Relay Rating	1A Max. @ 24VDC
Serial Console Port Specification
Connector Type	RJ-45
Number of Ports	1
Serial Interface	RS-232 (TXD, RXD, Signal GND)
Baud Rate	9600Bps
Device Data Control
Data Bits	8
Parity	None
Stop Bits	1
Flow Control	None
Export Information
Packaged Shipping Weight	2.14 lbs
Package Dimensions	10.1" x 7.0" x 3.6"
UPC Code	7-56727-32050-0
ECCN	5A991
Schedule B Number	8517.62.0050
Regulatory Approvals
Emissions	Canadian EMC Requirements ICES-003 European Standard EN55022 CISPR 22 FCC Part 15 Subpart B Class A limit
Immunity	European Standard EN55024: IEC 1000-4-2/EN61000-4-2: ESD IEC 1000-4-3/EN61000-4-3: RF IEC 1000-4-4/EN61000-4-4: Fast Transient/ Burst IEC 1000-4-5/EN61000-4-5: Surge IEC 1000-4-6/EN61000-4-6: Conducted Disturbance IEC 1000-4-6/EN61000-4-8: Magnetic Field IEC 1000-4-6/EN61000-4-11: DIPS and Voltage Variations
Saftey	IEC 60950/EN60950 (LISTED) CSA C22.2 No. 60950/UL60950 Third edition
Other	European Standard: 2002/95/EC Directive (RoHS)
Regulatory Approvals

Four 10/100 TX Power over Ethernet ports and two redundant 10/100 TX uplink ports
DC 48V Power Input for IEEE 802.3af PoE output (IEEE 802.3af)
Up to 30W per port for PoE plus High Power solution with DC 55V Power Input (IEEE 802.3at)
DC 24V Power Input for DC 24V output through Ethernet (Non-standard PoE)
UP to 100W for total power budget
Support IEEE 802.3af for PoE detection and PoE classification resistors
PoE control and schedule by hour/weekly basis
Auto-detect Powered Device status for device auto-reset (LPLD)
Redundant Ring technology, back up system recovery time less than 5ms
SNMP v1/v2c/v3, IGMP snooping v1/v2/v3, RMON, VLAN, QoS
Network security by IP/MAC address, SSL and SSH
Built-in hardware watchdog timer for system auto-reset
Aluminum rugged enclosure with IP-31 grade protection
Forced mode powering
Wide operating temperature range (-25° to 60° C)

Product Support and Service Information

Sales Support

Call +1.763.494.4100, or e-mail sales@comtrol.com

Technical Support

All Comtrol products come with easy-to-use documentation on a CD. For technical assistance, our U.S.-based technical support team is only a phone call away.

Call +1.763.494.4100, or submit your question online at http://www.comtrol.com/support/, or visit our forum at http://forum.comtrol.com/.