Powerful IO-Link Master Web Interface for IO-Link, EtherNet/IP™, and Modbus TCP Configuration

  • IO-Link – typically, IO-Link port configuration is not required since the Comtrol IO-Link Master and IO-Link devices automatically negotiate the minimum cycle time and communicate upon connection.  You can configure the IO-Link ports to run in digital input or digital output mode.

This screen shot illustrates the following:

  • Port 1 – Configured for Identical Device Validation Mode
  • Port 2 – Configured for Data Storage (Automatic Upload), Compatible Device Validation Mode, and Strict Data Validation Mode
  • Port 3 – Configured for Data Storage (Automatic Download), Compatible Device Validation Mode, and Loose Data Validation Mode
  • Port 4 – Configured for Compatible Device Validation Mode
  • Port 5 – Configured for Compatible Device Validation Mode and Loose Data Validation Mode
  • Port 6 – Configured for a digital input device
  • Ports 7-8 – Configured with the default values

Configure the IO-Link devices attached to the port before enabling data storage features.

IO-Link_Configuration_Page

  • EtherNet/IP™ – provides EtherNet/IP™ configuration to control these settings:
    • ISDU data
    • Process data
    • Transfer mode
    • Read/Write Tag/File
    • Write PDI to Tag/File
    • Read PDO from Tag/File

For detailed information about the IO-Link Master EtherNet/IP™ interface, refer to the IO-Link Master EtherNet/IP™ Reference Manual.

EIP_Configuration_page

  • Modbus TCP – provides Modbus TCP configuration to control these settings:
    • ISDU data
    • Process data
    • Transfer mode

For detailed information about the IO-Link Master Modbus TCP interface, refer to the IO-Link Master Modbus TCP Reference Manual.

ModbusTCP_Configuration_Page
< BACK to Features